NOTES:
When properly attached the Harness Retrofit Leg Pads should appear as shown in Figure 15.
It is also possible to attach the leg pads when you are wearing the harness, however reaching behind the leg and properly attaching
the snap fasteners may prove difficult for some users.
Fig. 12 (Harness Shown with Fall Arrest Fig. 13 (Lower Harness Section, Back Strap and Below
Attachment Facing Down) with Leg Pads (Shown for Clarity))
Fig. 14 (Leg Pad Attached to Leg Strap) Fig. 15 (Leg Pads Attached to Both Leg Straps)
(Lower Harness Section, Back Strap and Below
Shown for Clarity)
REMOVAL INSTRUCTIONS:
1.
To remove the leg pads, simply detach all of the pad attachment loops, and remove the pads.
2.
Properly store the leg pads for future use.
CLEANING & STORAGE:
Clean pads with mild soap & water. Allow to air dry completely (not in sunlight). Your equipment should be stored and transported so that it
does not come into contact with moisture, ultra violet rays, extreme temperatures, or chemical agents. Warnings pertaining to cleaning,
storage, and transportation should be strictly adhered to.
BUCKINGHAM MFG. CO.
BINGHAMTON, NY
www.buckinghammfg.com
1-800-937-2825
K9Retro.Doc
P/N: 230444 2/5/19
