WARNINGS:
Read understand and follow these and all other instructions and warnings attached and/or
packed with this product before use.
This product is designed to be used by a person with a maximum weight of 350 lbs. when fully
equipped.
This equipment is intended for use by properly trained professionals only.
Consult your doctor if there is any reason to doubt your fitness to safely absorb the shock from
a fall arrest. Age and fitness seriously affect a worker’s ability to withstand falls.
Fall protection equipment, (i.e. fall arrest, work positioning belts, retrieval, suspension etc.)
should not be resold or provided to others for re-use after use by original user.
Avoid rubbing against abrasive surfaces and sharp edges.
Use Caution when using this equipment around moving machinery and electrical wires.
Use this product only in combination with compatible equipment.
Equipment subjected to impact loading must be immediately removed from service, destroyed
and discarded or contact manufacturer for information regarding possible repair or
recertification.
Always visually check that the carabiner or snaphook freely engages the anchor point and the
gate is completely closed. Never rely on the feel or sound of a carabiner or snaphook
engaging.
Never disable the locking mechanism on the carabiner or snaphook, punch holes in or alter a
connecting device or any part of this kit in any way.
Do not let any part of this kit come into contact with any chemicals, corrosive materials, acids
or basic solvents.
Avoid working where components of this kit will be in contact with, or abrade against
unprotected sharp edges. If working near sharp edges is unavoidable, protection against
cutting must be provided by using a heavy pad or other means over the exposed sharp edge.
Product covered under these instructions / warnings should not be resold / redistributed or
re-used after use by original user.
Employer - instruct employees as to proper use, warnings and cautions before use of this
equipment.
MAINTAINANCE:
Proper maintenance and storage of your equipment will prolong its useful life and contribute
toward its performance. Clean equipment with water and mild soap and allow to dry
thoroughly without using excessive heat. Lubricate as necessary.
Apart from visual examination of product before and after each use, it should be inspected at
least once a year by an authorized person.
INSPECTION:
Prior to and after each use, carefully inspect each component. The inspection should include, but not be
limited to information contained in individual component instructions packed with this product.
NOTE:
Ensure proper fit / size of product before use. This product can not be returned unless it is in
new / unused condition.
BUCKINGHAM MFG. CO
BINGHAMTON, NY
www.buckinghammfg.com
1-800-937-2825
3111.doc (Rev. 12-19-16) P/N 230198
