Bucinator
Höhenstr. 101
6020 Innsbruck,
AUSTRIA
Kontakt
+436769644000
www.bucinator.at
Firma
FN 365597v
UID
ATU 668 08 403
2
H
ANDLING
1.
Place a Bucinator pad underneath the mattress on the side in the exit area.
2.
Connect the receiver to the nurse call system.
3.
Test the systems functionality by triggering a test alarm.
3.
Cleaning/disinfection
The system can be cleaned with all commercially available disinfectants and cleaning agents, max.
70% alcohol by volume.
Do not use any caustic agents!
4.
Battery management
Depending on how much the system is in use, the button cell will last for several years.
If the LED light continues to flash for approx. 3 seconds, please change the battery.
Proceed as follows:
4.
Take the device out of the protective cover.
5.
Loosen the screws on the housing with a screwdriver and open the housing.
6.
If necessary, remove the old battery and insert the new one. Use only CR2032 batteries. Pay
attention to the correct polarity.
7.
Lock the battery compartment and check the systems functionality.
ATTENTION!
Keep the batteries out of the reach of children!
Empty batteries are hazardous waste and do not belong in the household waste!
