Remove for travel
:
The Card Doubler is designed to accommodate two cards without interfering
with the 208 switches. As a result, the Card Doubler must be removed before
attempting to replace the cover for your Easel case. If you have installed the
support standoffs, those standoffs can remain in place.
Remember to power off your system before installing or removing cards in the
Program Card slots.
Extra connections and testpoints:
Easel users are a clever bunch, and so a few test points have been added as
well as pads for banana jacks at J1 and J2. In the spirit of the Original “Retro”
Program Cards, connections between added CV inputs through resistors to
these points is possible. Buchla Electronic Musical Instruments is not
responsible for any user circuit modifications.
