Bubble 4b half pod, Информация пользователя

Страница: 11 / 13

11
Cleaning the door glass.
If you are running the stove correctly and using the specified fuel the door glass will remain clean, there may
be slight sooting after lighting or re fuelling but this can be easily removed using a damp cloth but
do not
attempt to clean the glass door with a damp cloth whilst the stove is running or the door is hot.
If the door glass does become tarred up you will have to use a glass cleaner available from Bubble Products.
When using these cleaners you should carefully follow the detailed instructions on the product packaging.
Avoid contact with skin, eyes and items other than the glass.
Before closing the stove door always make sure that there are no obstacles likely to break the glass upon
closing.
Do not use the door glass to push awkward shaped logs into the firebox as this can break the glass.
To Replace Door Sealing Rope and Glass
The door sealing rope should be replaced before the start of the heating season.
The door glass should be replaced if it becomes etched or discoloured.
Remove the door and lay it down on some bubble pack.
Support it around its periphery taking great care not to break the door glass.
Use an old flat bladed screwdriver to scrape the old rope and cement from the cast socket.
Apply adhesive to the socket and then re fit the new rope.
To Replace the Door Glass
If you need to replace the door glass make sure that you order the door glass sealing rope.
Remove the door and lay it down on some bubble pack.
Support it around its periphery.
Undo the 4 screws and clamping plates then lift the glass out.
Remove the sealing rope under the glass and replace it with new rope.
Replace the glass and the plates and screws.
Make sure that the rope forms a good airtight seal, make sure that the ends of the rope but up together.
•
Parts not covered by warranty are: -
•
Riddling Grate
•
Riddling Grate Frame
•
Firebricks
•
Baffle plate
•
Door Glass
•
Paint finish
•
Note the use of Petro Coke or Petro coke based fuels will invalidate the warranty and lead to
damage of all the components not covered under warranty.