MADE IN CHINA
Exclusively for Bubba Blue Pty Ltd
138 Fairbank Road,
Clayton South, VIC, 3169, Australia
[email protected] www.bubbablue.com.au
CARE INSTRUCTIONS
Cold gentle machine wash. Fasten velcro to prevent snagging. Do not bleach or wring. Do not tumble dry.
Line dry. Do not iron. Do not dry clean
K
Note: Fibre contents listed are exclusive of trims.
COVERED BY AUSTRALIAN PATENT 2020101458
To see our full range of products,
please visit one of our retailers or go to
www.bubbablue.com.au
Thank you for choosing
Bubba Blue
®
Premium
Baby Collection!
1. The short piece covers the bars along the front length of the cot.
2. Align the centre of part 2 (as indicated by the middle set of ties) to the middle bar on the length of the cot.
3. Ties should be on the top edge, and facing outside the cot.
4. The polyester mesh faces the outside of the cot, the organic cotton mesh faces inside the cot.
5. Attach the centre tie securely to the middle bar of the cot to help keep liner upright. (see diagram E, 2.)
6. Take the left side of the liner and weave AROUND the last bar, so it wraps back on to itself
(see diagram E & F, 6 & 7)
7. Gently pull the liner so it is taut and press firmly on the top and bottom edges to secure the
velcro attachment.
8. Repeat on the right side.
9. The liner’s lower edge should be tucked in below the mattress level for safety.
INSTALLING PART 2: SHORT PIECE
OUTSIDE
FRONT COT
VIEW
(Diag E.)
TOP COT VIEW
PART 1 & PART 2
OF LINER INSTALLED
(Diag F.)
Safety Installation Checklist
The liner has the organic cotton mesh on the inside of the cot - soft for baby to touch.
Ensure the liner is taut and firmly wrapped around the posts and bars.
All velcro attachments on top & bottom edges are secured.
All ties are securely tied on the outside of the cot. Liner must not fall inwards or slump.
Liner’s lower edge is tucked in below the mattress level.
7.
7.
2.
6.
6.