background image

Assembly:

•  Mount detector only in horizontal position.
•  Produce drill holes for two screws M5 - according to the 

hole layout from the smoke detector pedestal.

•  Mount the smoke detector  pedestal with two screws  M5 

at the mounting surface.

•  Guide detector into locking position and turn it to the 

right.

Maintenance:

•  Check smoke detector regularly with testing gas. 

 

Adhere to instructions for detector test.

• 

Yellow

 blinking of the 

LED

-display indicates a fault.

•  Clean dirty detectors with a moist cloth or a little rubbing 

alcohol. Replace if necessary.

•  For maintenance and change of the detector, note the 

current regulations  (e.g. DIN 14 675).

N

ote

Optical smoke detector with mounting base

Part.-No.:  

60.300

Application

:   for the automatic early detection of fire and controlling of the  

                        „Emergency  OPEN“  function  via  a  detector  line  of  RWA 
                        Control Units.

Measuring element:          photo electric / scattered light principle
Operating voltage:       8,5 – 33 V DC
Standby current:              < 100 μA
Housing:                  Surface mounting, plastic (ABS), pearl white
Dimensions  (ØxH):      Ø100 x 50 mm
Connections:                Screw terminals 1,0 mm² (rigid wire)
Protection rating:       IP23D
Display:                 Alarm LED

VdS certification no.: 

G 204039

Feature / Equipment: 

•  Fire algorithms to avoid false alarms, automatic alarm threshold tracking
•  According to EN 54-7, connection to the detector line input

I

nstallatIon

 

and

 C

ommIssIonIng

 I

nstruCtIon

Optical smoke detector

!

!

!

Remove the dust protection cap only with 
start-up.
The connection depends on the Control Unit.

The smoke detector must be disposed in 
accordance with legal regulations.

Strictly observe the information given in this 
and in the instructions for installation of the 
RWA control unit, when mounting the 

optical smoke detector

Details can be found on our website 

 

               

www.btr-hamburg.de

Keep this instruction over the lifetime of the 
product.

Warranty claims require proper and profes- 
sional assembly, installation and maintenan-
ce in accordance with national regulations 
and manufacturer‘s instructions of the RWA 
control unit.
The safety instructions in the supplied pro- 
duct documentation are to be observed.

Отзывы: