®
4
PROGRAMMING
4.1 ACCESS TO PROGRAMMING
•
Lift the receiver
•
Type:
•
Type the access code (e.g. basic )
- If the access code is correct you will hear a start-dialling tone
- If the code is incorrect you will hear a time-out tone. Lift the receiver and repeat the
procedure described above.
•
After the start-dialling tone proceed with the programming.
The programming can be performed from any extension.
4.2 ACTIVATING/DEACTIVATING VIDEO DISTRIBUTOR
This command activates or deactivates the Video Distributor
Example:
To activate the video distributor proceed as follows:
•
Lift the receiver
•
Type :
•
Type the access code (e.g. basic )
•
After the start-dialling tone type the Macrocommand:
•
When you hear the confirmation tone hang up
13
#
#
1
2
3
4
0
= Disable
1
= Enable
Activation
77
1
2
3
4
#
#
7
7
1
#
All manuals and user guides at all-guides.com