15
GB
DESCRIPTION OF THE REAR PANEL
(10)
CAMERA IN
: connectors to connect the video inputs from the cameras.
(11)
VCR IN
: connector to display the recorded pictures, VCR video output.
(12)
MONITOR OUT
: connector for connection to the monitor for the direct display of
the connected cameras.
(13)
VCR OUT
: connector for the connection to the VCR input for recording.
(14)
RS232 CONNECTOR
: this connector is a female 25-pin D-SUB and is used to con-
nect the multiplexer to a computer. For details refer to the description of the RS232
and ASCII commands.
(15)
LOOPING OUTPUTS OF THE CONNECTED CAMERAS
: these connectors can
take the video signal of the connected camera for further use with other video
devices.
(16)
IN SWITCH
: connector to connect an external trigger signal to enable the
synchronisation of the recording on a Time Lapse Recorder or DVR.
(17)
CALL OUT
: connector used to connect to another monitor to display the channel
where there is an alarm.
(18)
SPOT OUT
: connector to connect the monitor which allows full-screen view of the
camera selected in the menu.
(19)
Alarm
CONNECTOR
: this connector is used to connect the input alarm, output
and reset alarms signal.
Refer to ALARM CONNECTOR PIN ASSIGNMENT.
(20)
POWER IN
: connector to connect a 12Vd.c. 1.2A power supply.
