Bticino LE03093AA, Инструкция по эксплуатации

Страница: 8 / 47

391504
8
5. OPERATING PROCEDURE
5.1 System configuration
First, connect one camera to the DVR, and connect its power supply.
After power on, DVR will auto-detect its peripherals (self-testing, auto detects the hard disk, etc.).
The system will detect the video input and judge whether the video system is PAL. When video input is unable to be detected
(VIDEO LOSS), the system will send out an alarm (it will not affect the actual recording, but when all (1CH-4CH) video images
disappears, the DVR will stop recording).
5.2 Monitoring Mode
This mode is a default status after power on.
Under this mode, system supports live view for monitoring. Press
《 》
button, the system enters the manual record mode,
press
《 》
button to start playback, press
《 》
button to enter the menu setup display.
During playback, press
《 》
button to return to monitoring mode.
Under Manual Record mode press
《 》
button to stop recording and return to monitoring mode or press
《 》
button under main menu also returns to monitoring mode.
During playback, press Stop button to return to monitoring mode or press
《 》
button to fast forward: FF1 ( ),
FF2 ( ) or FF3 ( ) and press
《 》
to rewind playback.
To restore default value: Enter MENU and select item EXIT, proceed “Load Setup Default” to return to factory default settings
(Default Password : 111111).
After returning to LIVE display it will return to factory default setting (111111).