4
5
The following chart shows the maximum current supplied to the devices, according to the battery
installed and to the level of autonomy required.
However, the maximum absorption must not exceed 2 A.
(
*
) In these cases the system respects level 1 of standard IEC 79-2.
lifetime when
there is
a power cut
type of battery installed
Connect the batteries to the power
supply terminals (3) using the
correct wire complete with
protection with fuse.
If you want to protect the battery compartment,
connect the contact on the container item
F115/8B (4) to a tamper line.
Install the container closing
covers
���
���
���
Be careful with the battery
polarity during the
connection.
24 h
15 h
8 h
300 mA (*)
480 mA
900 mA
500 mA (*)
800 mA
1,5 A
1 A
7,2 Ah
12 Ah
24 Ah
1,6 A
2 A
3
4
Please note: when the LED
(5) flashes, it means that
the battery is dead.
5