Bticino AM 5864, Руководство пользователя, Страница: 80 / 108

Use
2
PASSWORD: *****
Enable/disable the burglar alarm
Press the icon to change the status of the system: (to enable).
(to disable).
Enter your Burglar Alarm Unit user code in the displayed page and confirm
with
.
If the sound system is enabled, you will hear the voice message: “enabled” or “disabled”.
Numbers from 1 to 8 at the bottom (available only in the system enabled
page) indicate the status of the divisions. In the example, zones 1 and 8 are
activated, whereas they are deactivated/excluded from 2 to the 7.
What type of alarm occurred?
If alarms have occurred while you were out, as soon as you get home
you will find a screen similar to the one in the example with the fol-
lowing information: the centre icon corresponds to the type of alarm
occurred, indication of the time, date, type of alarm and zone in which
it has occurred.
The alarm signal remains stored until the system is enabled again.
Touch the icon in the main page to look at the alarms memory.
Touch the icon to cancel the alarm.
Enable the burglar alarm Disable the burglar alarm
PASSWORD: *****
“Intrusion” alarm example * Technical alarm icon
Type of alarm:
- intrusion
- tampering
- antipanic
- technical*
Indication of the:
- time
- date
- zone
intrusion
11:01 17.07 Z 1
1 2 3 4 5 6 7 8
80