![background image](http://html1.mh-extra.com/html/bticino/391893/391893_manual_2825135011.webp)
Trouble shooting
In case of trouble, please follow these steps:
- Check if all connection is right, and if RJ45 is in accordance with IA/TIA568A or 568B (see below)
- Make sure the real distance not exceeds the allowed transmission distance;
- If yellow LED on RJ45 is lighting on individual channel, please cut off the power supply and unplug the cable to check if there is any short circuit
or power consumption overload.
Panels diagrams
VIDEO & POWER RJ45 INPUTS
1
2
3
4
VIDEO OUTPUTS
100-240V~ /50-60Hz
POWER
ON
OFF
4 Ports Video&PowerSever
- Ref. : 391893 (UTP Balun 4 CH and 12V)
1
4
3
2
NO.
Component
Description
1
Power LED
Indicate if power supply is correct.
2
Power Supply Input
110 - 230V~ 50-60Hz power input connector.
3
BNC-F
Video output.
4
RJ45
Green LED = power indicator (must be on).
Yellow LED = over-current indicator (must be off).
Installation procedures
Please follow the next installation steps:
(1) Please switch off cameras and monitors before installation;
(2) Connect the transmitters to the cameras via BNC-M and DC jack;
(3) Connect the transmitters to the receiver via UTP cable;
(4) Connect DVR / Monitors to the receiver via coaxial cables;
(5) Check all connections, and power on the receiver;
(6) Check if the image is correct.
Caution
391893, 391894, 391895 are not waterproof.
Do not operate the devices with wet hands.
If one end is EIA/TIA568A,the other end should also be EIA/TIA568A.
If one end is EIA/TIA568B,the other end should also be EIA/TIA568B.
1
4
- Ref. : 391894 (UTP Balun 8 CH and 12V)
ON
OFF
POWER
8 Ports video&Power Server
100-240V~ /50-60Hz
1
2
3
4
5
6
7
8
VIDEO & POWER RJ45 INPUTS
VIDEO OUTPUTS
3
NO.
Component
Description
1
Power LED
Indicate if power supply is correct.
2
Power Supply Input
110 - 230V~ 50-60Hz power input connector.
3
BNC-F
Video output.
4
RJ45
Green LED = power indicator (must be on).
Yellow LED = over-current indicator (must be off).
2