9
3.2 Collegamento della telecamera motorizzata all’NVR (PoE o non PoE)
Esempio:
ROUTER
SWITCH
PC remoto
PC locale
NVR
Telecamera
motorizzata
Tastiera 391856
(opzione)
ALIMENTAZIONE
24 V CA
: cablaggio rete IP
- - - - - - - : cablaggio RS485
Telecamera
Tastiera
RS 485 +
TX1 +
RS 485 -
TX1 -
La telecamera motorizzata può essere collegata al registratore direte direttamente in corrispondenza di una porta dello switch
integrato del registratore, se presente, o ad una porta switch esterna.
Poiché la configurazione predefinita della telecamera motorizzata è DHCP, lo switch interno all’NVR o esterno le fornirà
automaticamente il suo indirizzo IP della rete locale.
Nota: il NVR deve disporre di una versione del firmware almeno pari a V5.2.0 - 20170227 o più recente.
In caso contrario aggiornare il firmware collegandosi al sito www.legrandoc.com o www.bticino.it.
4 Configurazione IP
È possibile pre-configurare la telecamera rispetto ai parametri della rete locale, con l’ausilio di un PC Windows, ad esempio in
fabbrica con un PC Windows e con uno switch su cui verranno collegati il PC e la telecamera motorizzata.
4.1 Configurazione rete predefinita
Parametri di rete
Configurazione predefinita
TCI/IP
Modalità
DHCP
Indirizzo IP
192.168.1.168
Maschera di sottorete
255.255.255.0
Gateway
192.168.0.1
Connessione
Porta client
30001
Porta HTTP
80
Porta RTSP
554
Autenticazione
Utente
admin
Password
admin
L’interfaccia Web dispone di un manuale d’uso specifico disponibile all’indirizzo http://www.legrandoc.com e sul
sito www.bticino.com.
M
anuele di istr
uzioni