Bticino 343100, Руководство по установке

Страница: 29 / 38

Monobloc Audio
Digital Entrance Panel
Installer manual
29
3.5.3 Setting up a new passepartout
If the code entered already exists, or if 20 master codes have already been programmed, an error
message will be displayed (see the dedicated section).
Enter the numerical code
(4 digits).
Press OK.
Press OK; a beep confirms
the new setting.
The menu can only be accessed if the passepartout function is enabled (P r 3.0);
otherwise the display will show the message E r 0 9.
3.5.4 Deleting a passepartout code
The menu can only be accessed if the passepartout function is enabled (P r 3.0);
- The operation cannot be
cancelled.
- If the code does not exist
the start menu is dis-
played (Pr--).
- If the sequence is wrong
an error message is
displayed (see the dedi-
cated section).
Enter the code to delete. Press OK;
a beep confirms that
the code has been
deleted.