1
1
6
7
2
8
3
4
5
A
B
C
067226 HD/HC/HS4658
L/N/NT4658N
574048
574098 AM5658
This devices features a PIR and US (ultrasound) movement detector, and a brightness
sensor for automatic activation of various types of loads following the detection of a
movement, and a brightness level lower than the set level.
The enabling/disabling of the load can also be performed manually using the
appropriate front pushbutton and/or using an external BUS control device.
IT is possible to configure several operating modes; for the detailed descriptions see
page 4.
Description
1.
PIR sensor
2.
LEARN LED
3.
US sensor
4.
ON-OFF button
5.
LEARN button
6.
Movement detector sensor (under the lens)
7.
Infrared transmitter (under the lens)
8.
Brightness sensor
Voltage:
27 V=
Current draw:
17 mA
Connection between sensor and actuator: SCS BUS connector
Sensor type:
movement detector (PIR+US) with 180°
detection angle and brightness sensor.
Flush mounted box depth:
40 mm
Weight:
60 g
Impact resistance:
IK04
Penetration of solids and liquids:
IP20
Time delay:
from 5 sec to 59 min. 59 sec
Brightness:
from 20 lux to 1275 lux
Operating temperature:
from - 5 °C to + 45 °C
Storage temperature:
from - 20 °C to + 70 °C
Technical data
Dimensional data
Front view
Legend
Size:
2 flush mounted modules
A
B
C
45
45
51
PIR+US flush-mounted SCS Green Switch
MQ00473-f-EN
09/06/2014
Standards, Certifications, Marks
Directive:
– Electromagnetic Compatibility Directive 2004/108/EC
Installation regulations:
– CEI 64-8
Product regulations:
– IEC 60669-2-1
– EN 50428
Environmental regulations:
– EU Directive 2002/96/EC: WEEE (Waste Electrical and Electronic Equipment)
– EU Directive 2002/95/EC: RoHS (Restriction of Hazardous Substances)
