BTI 9 094948, Руководство пользователя, Страница: 13 / 16

12
Care and Maintenance
Repairs shall only be carried out by qualified staff trained and experienced
in this area.
The tool shall be inspected by a skilled electrician after every repair.
The power tool is designed to require only a minimum of maintenance and
care. However, the following work shall be carried out and/or the following
parts shall be inspected regularly:
•
Do always keep the power tool and the ventilation slots clean.
•
Make sure that no foreign objects get into the power tool.
•
If the tool breaks down, the repair shall only be carried out by an
authorised shop.
Information on noise and vibration
Measured values determined according to EN 60745
The A-weighted noise level of the tool is typically:
Sound pressure level (L
PA
) 79 dB(A);
Sound power level (L
WA
) 90 dB(A)
Uncertainty K=3 dB.
Wear ear protection!
Hand-arm vibration:
Hand-arm vibration is typically lower than 2.5 m/s².
Uncertainty K 1,5 m/s²
Measured values determined according to EN 60745
The vibration emission level indicated in these instructions has been
measured in accordance with a standardised test method given in EN
60745 and can be used to compare one tool with another. It is also suitable
for a preliminary evaluation of the vibration emission level.
The vibration emission level set out in these instructions presents the main
applications of the power tool. If the power tool is used for other
applications or with different tools or if maintenance is not sufficient, the
vibration emission level may vary. This may lead to a significantly higher
vibration emission level during the whole working period.
In order to be accurate, an estimation of the level of exposure to vibration
should also take into account the times when the tool is switched off and
when it is running but not actually used. This may significantly reduce the
level of exposure to vibration during the whole working period.
Additional protective measures in order to protect the operator from
vibration effects, e.g. maintenance of power tools and tools, keeping hands
warm, organisation of work processes, shall be determined.