BTI Wireless CP880, Руководство пользователя, Страница: 12 / 19

CP880+CR650
12
4 Choose Location
The ODU can be mounted on an antenna pole or mast or on a wall using the supplied mounting
bracket.
 Choose a mounting point that is sturdy enough to hold the ODU, even during high winds.
 When choosing a location to install the ODU, please be noted that the ODU’s front panel
should point towards your service provider’s nearest base station. You do not need to be
able to see the base station from the ODU’s position. However, if you experience difficulties
with signal reception, a Line of Sight (LoS) connection may produce better results.
 It is suggested that you transport the ODU to its intended installation location in its original
protective package.
To obtain the best radio signal level and connection quality, the CPE antenna should be aimed
towards the best eNB or BS directly. To search for the best eNB direction, the user can rotate the
CPE slowly and tilte CPE slightly to the best signal direction. The CPE radio signal strength level
can be observed from the RF LEDs mounted on the lower panel as shown below. The more LEDs
on, the better the signal strength.