BTECH GMRS-V2 Скачать руководство пользователя страница 44

Страница: 44 / 81

VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP

GMRS-V2

Press the

key to exit the menu.

Channels that are in the scanning list will be indicated on the LCD display. Under the Memory

Channel number, a small icon (star) will appear if it is in the scanning list. No icon under the

memory channel will be present if the channel is skipped during scanning.

Tone Scanning

Scanning for CTCSS and DCS Tones/Codes

Scanning for a CTCSS tone or DCS code can be done while Frequency Mode (VFO) or

Channel Mode (MR) is selected.

CTCSS tone and DCS code scanning mode can be accessed with or without a signal being

present. The scanning process itself only occurs while a signal is being received.

Not all repeaters requiring a CTCSS tone or DCS code for access will transmit one back. In

that case, the transmitter of a station that can access the repeater would need to be

scanned. In other words: this would be done by listening to stations on the repeater's

input frequency.

Scanning for a CTCSS Tone

Содержание GMRS-V2


















































































Результаты поиска

Содержание GMRS-V2

Отзывы:

Бренды по названию

Популярные бренды

BTECH GMRS-V2, Руководство пользователя

Результаты поиска

Содержание GMRS-V2

Отзывы:

Бренды по названию

Популярные бренды