BTECH GMRS-20V2 Скачать руководство пользователя страница 36

Страница: 36 / 67

VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP

Scanning for CTCSS Tone

(ACTIVE SIGNAL REQUIRED)

Press the

key to enter the menu.

Enter

on your numeric keypad to come to Menu 11: R-CTCS

Press the

key to select.

Insure you have a tone activated (and it is not off)

Press the

to begin CTCSS scanning

The CTCSS frequency will change on the screen to indicate the radio is in CTCSS scanning mode. In this

mode, whenever the radio is receiving an RF signal on the selected channel, the display will cycle

through the CTCSS tones as they are being tested. Once the frequency of the received CTCSS tone is

determined, the scan will stop and audio will be able to be heard from the repeater.

Press the

key to save the scanned tone into memory, then press the

key to exit the menu.

Don't forget to set menu 11 back to OFF when the CTCSS tone is no longer required.

Scanning for a DCS tone

(ACTIVE SIGNAL REQUIRED)

Press the

key to enter the menu.

Enter

on your numeric keypad to come to Menu 10: R-DCS

Press the

key to select.

Insure you have a tone activated (and it is not off)

Press the

to begin DCS scanning

Содержание GMRS-20V2




































































Результаты поиска

Содержание GMRS-20V2

Отзывы:

Бренды по названию

Популярные бренды

BTECH GMRS-20V2, Руководство пользователя

Результаты поиска

Содержание GMRS-20V2

Отзывы:

Бренды по названию

Популярные бренды