http://www.kamami.com/
ZL10PLD –
dipPLD module with XC3S200 device
5
JTAG connector
ZL10PLD module is equipped with IDC connector, for connecting ISP programmer (for example: ZL11PRG,
ZL11PRG-M, ZL4PRG). Placement of this connector on the board and signals arrangement are shown in the below
pictures.
FPGA device and configuration memory (Flash memory U2) are connected to a JTAG chain, as in the below pic-
ture. This connection enables independent Flash memory programming and configuring of FPGA device with the
use of programmer which is in accordance with Xilinx DLC III programmer (for example: ZL11PRG, ZL4PRG).
FPGA configuration mode selection
FPGA device, after turning on voltage, can be automatically configured (configuration is copied from Flash confi-
guration memory) or can wait for configuration data which are supplied by the user with the use of JTAG interface.
The choice of configuration mode takes place with the use of JP4 connector, according to the description, placed
on the printed board.