BTC BDV 316C, Руководство пользователя

Страница: 8 / 18

16X DVD-ROM Drive
Hardware Installation
1. Turn off the power to your computer system and all peripheral
devices.
2. Disconnect all cables and connectors from the back of your
computer, and then remove the cover from the computer.
3. Insert the DVD-ROM drive into one of the vacant 5.25" drive
bays and secure it to your PC with all four mounting screws.
4. Connect one end of the 40-pin IDE cable to the IDE connector of
the DVD-ROM drive and the other end to the IDE port on your
motherboard.
The red-edge of the IDE cable must be connected to Pin 1 on the DVD-
ROM drive.
5. If you have a sound card that can be connected to this DVD-
ROM drive, you can also connect the DVD-ROM drive (as Audio-
Out) and the sound card (as Audio-in) with a 4-pin audio cable.
If your mainboad is integrated with built-in sound system, plug
the 4-pin audio cable into the CD-IN connector on the
mainboard as Audio-in.
6. Re-attach the cover of your computer, and reconnect all power
cords to the computer.
4