CD-WRITER 4816IM
14
Please check if the power cord is connected securely.
Q6. The tray cannot be ejected.
There are two possible reasons:
(1) Need to be ejected by the application.
Some of the burning or playing application will lock the drive. You have
to eject by application and close it so as to restore the use of panel
buttons.
(2) The CD is inserted incorrectly.
Please insert a paper clip or small rod into the emergency hole on the
front panel for manual ejection.
Q7. The CD-RW drive cannot read some general discs.
Please check if the disc has deep scratches, fingerprints, or other
contaminants on the discs surface. Clean the disc if it’s necessary.
Q8. CD-WRITER 4816IM drive cannot write.
We suggest as follows:
(1) Use the burning software which is provided by original supplier and
bundled with this CD-ReWritable drive or download the update file from
internet.
(2) More capacity of hard disk is needed if using hard disk as temporary
buffer.
(3) Place the disc correctly.
(4) The blank disc needs full format first if using packet writing software.
Q9. “Buffer underrun” always occurs while writing discs.
Here are some suggestions:
(1) Close the screen saver & TSR (Terminate and Stay Resident).
(2) Quit other redundant application when burning.
(3) Select good quality and high-speed supported blank discs.
