15
WWW.BBTA.COM.AU
BBT-LM-BSES-SP-4S
4. With the starter handle in its support, take the starter
handle with your right hand and pull slowly as far as to have
a resistance, then pull energetically on the starter handle
with starter rope through the support. (If the cold start is
not sufficient enough, repeat this operation 2 or 3 times)
OPERATIONS
Starter Grip
5. Immediately after the start, push back the choke lever
from “CHOKE” position to “RUN” position.(If the
temperature is low, allow the engine to run for a few
minutes before starting to work.)
* Note: Not all models have this choke lever.
Operating the Controls for Mowing
Blade is in action as soon as engine is started. While the machine is working maintain the security handle in
working position. The engine will stop as soon as you release the engine control bar.
Release the lever to stop the engine whenever you need to leave the Lawn Mower.
Clutch Lever
• Push the clutch lever forward and hold it against the handlebar to propel
the Lawn Mower forward.
• Release the clutch lever to stop the Lawn Mower’s forward movement.
• Always release the clutch lever before starting the engine. If the clutch is
engaged, the Lawn Mower will move forward.
• Operate the clutch lever with a quick and complete motion, so the clutch
is either fully engaged or fully released. Hold the clutch lever against the
handlebar during self-propelled mowing. This will help to extend the
service life of the clutch mechanism.
RUN
Clutch Lever
