37
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or visit
www.bt.com/producthelp
Answer delay
Answer delay sets the number of times your BT Xenon 1500 will
ring before the answering machine picks up your call. The default
setting is 6 rings. You can change this setting from between 2-9
rings or to time saver mode.
1
. Press the
Menu
button, the display shows
ANS
MACHINE
, press .
2
. Press
or
until
ANS
SETTINGS
is displayed and press
to select.
3
. Press
or
to display
ANSWER
DELAY
and press .
4
. Press
or
to select the number of rings you want
(2-9)or
TIME
SAVER
and press .
5
. Press and hold to return to standby.
Remote access
Ensure that you have Remote Access turned on and that you
have set a Remote Access PIN first if you want to use this feature.
When switched on, you can call in from another phone to listen
to your messages and operate your answering machine. You are
asked to enter your system PIN so that other people cannot ring
up and listen to your messages. To change your System PIN, see
page 38.
Switch remote access on/off
1
. Press the
Menu
button, the display shows
ANS
MACHINE
, press .
2
. Press
or
until
ANS
SETTINGS
is displayed and press
to select.
3
. Press
or
to display
REMOTE
ACC
and press .
4
. Press
or
to choose either
ON
or
OFF
and
press .
5
. Press and hold to return to standby.
If you have a voice mail service e.g.
1571 please ensure that the ring
delay is set to answer before the
voicemail service. Therefore, the
ring delay should be less than on
the voicemail if you want the
Xenon 1500 answer machine to
answer calls.
