![BT Visitor Phone Скачать руководство пользователя страница 5](http://html.mh-extra.com/html/bt/visitor-phone/visitor-phone_quick-install-manual_2824421005.webp)
BT Visitor Phone Quick Install Guide
Issued by: North Supply Ltd
Issue no: BTDE020201/01
Date: May 2018
Page 5 of 7
In strictest confidence
Number to be dialed when
“Call” button pressed
*100 + X ( tone) + DN + #
Note: x = 1 (Day) or 2 (Night) DN = Up to 20
digits
1 = Day
Exit Programming Mode
*911
1.4
Telephony Operations
Function
Programming Code
Default Value
The day/night operator
destination number (DN) will
be dialed when “Ring”
button is pressed respective
to day/night operational
mode.
* 1 0 0 + X (tone) + DN + #
Where:
X = 1 day
X = 2 night
Destination number (DN) = up to 20 digits,
including *, #, pause and A-D characters
Day - Empty
Night - Empty
Delete a day or night
operator
destination number (DN).
* 1 0 0 + X (tone) + #
Where: X = 1 day
X = 2 night
Programming 1 digit(s)
prefix to allow dialing
outgoing calls.
When beginning with these
digits, the door phone will
process dialing.
* 1 0 1 + Prefix + #
Prefix: digits 0~9 only
To cancel this operation enter:
* 1 0 1 + #
Example: Command “101 259 # (tone)“ allows
dialling to destination numbers with first digit 2,
5 and 9.
Note: Parameter don’t take effect on Speed Dial
memories destination numbers dialling.
The maximum conversation
time (sec)
* 1 0 2 + XX
Where: XX = seconds (10-99)
00 = Unlimited
60 seconds
Time interval between DTMF
digits during outgoing
dialing
* 1 0 3 + X
Where: X = 1-9 (each step is 200 msec)
=2 (400 msec)
Inter digits dialing time out
(in sec)
* 1 0 4 + X
Where: X = seconds 1-9
3 sec
Number of busy tone cycles
in order to detect the busy
signal
* 1 0 5 + X
Where: X =0-9 (0 - no busy detection, 1-2
cycles, 2-4 cycles etc.)
3 (6 cycles)
Busy signal cadence
configuration for busy
detection
* 1 0 6 + X (tone) + Y (tone) + NNNN
Where: X = 1 - busy cadence 1
X = 2 - busy cadence 2
Y = 1 - On, Y=2 - Off
NNNN - time in msec
1-500 On, 500 Off
2 - 250 On, 250
Off
Pause time after pick up a
line and before dialing
* 1 0 7 + X
Where: X = time in sec 1-9
1
The minimum time in
seconds to detect
continuous tone
* 1 0 9 + X
Where: X = time in sec 1-9
3