Verve 3000 user guide ~ 3.1 Edition ~ 14th October ’02 ~ 4805
32
Problem
Handset on the charger
does not charge.
Handset does not ring.
Your caller cannot
hear you.
The incoming caller’s
number is not displayed
even though you have
Caller Display.
You keep hearing an
error beep.
Possible cause
Is another handset using
the line for a long time?
Is the handset placed on
the charger properly?
Are the batteries in
correctly?
The handset ringer may
be switched off.
Secrecy is switched on.
The caller’s number has
been withheld.
You have pressed the
wrong button in a
sequence.
Solution
Maximum charging power
is only possible when no
calls are being made.
Make sure that the
handset is placed in the
charger correctly. You will
hear a confirmation tone.
Check that you have put
the batteries in the right
way, you will hear a
confirmation tone.
See page 23 for how to
set the handset ringer.
Press the
S
button to
speak to your caller
again.
Caller has to allow their
number to be sent.
Check the prompts in
the display or refer to
instructions in the user
guide.
HELP