Press the
QUICKDIAL
button.
Press the
✱
button, then the
2
button.
Press either
0
for TONE
dialling or
1
for PULSE
dialling.
Press the
QUICKDIAL
button
to confirm.
With some switchboards it
may be helpful to dial a
pause after entering the
PSTN pre-fix code, e.g.
9
,
11
etc. to enable you to get an
outside line.
You can therefore enter a
pause when storing a
memory number:
Press the
QUICKDIAL
button.
The handset In Use light
will flash.
KEYPAD
Enter the memory location
number (
0
-
9
) under which
you want the number to be
stored.
KEYPAD
Enter the PSTN pre-fix code
e.g.
9
.
Press the
REDIAL
button.
This will add a 3 second
pause.
KEYPAD
Then enter the telephone
number.
Press the
QUICKDIAL
button.
You will hear a confirmation
tone.
To set the dialling mode
Switchboard access codes
24
Quickdial
Quickdial
Quickdial
Quickdial
ABC
2
0
1
When connecting your Synergy 500 to
a switchboard/PBX, you may need to
change the dialling mode from TONE
to PULSE.
R
Redial
Please note
Your Synergy 500 is supplied set to
tone dialling.
To enter a PSTN pre-fix code
and pause in the memory
