BT RESPONSE 5, Руководство пользователя

Страница: 16 / 24

To record a new outgoing
message from another phone
•
Ring your Response 5 as normal.
You hear your current outgoing
message followed by a melody
and then a beep.
•
Enter your security code, holding
the button down for 3 seconds.
You hear 4 beeps.
•
Enter your security code again,
holding the button down for 3
seconds. You hear 2 beeps and a
melody while your Response 5
sets the tape ready for recording.
•
When you hear a single beep,
record your new outgoing message.
•
When you have finished, wait for
2 seconds then enter your security
code, holding the button down for 3
seconds.
•
You hear a beep and a melody and
then your new outgoing message
is played back to you.
•
Hang up. The new outgoing
message is now set.
Your Response 5 is now ready to
take new incoming messages.
If the tape becomes full
You will hear four beeps after your
outgoing message. You can reset
the tape to start recording from
the beginning.
When you have heard your outgoing
message and the four beeps:
•
Using a Touchtone
™
telephone
keypad, enter your security code,
holding it down for 3 seconds, to
play back your messages.
•
After listening, hang up. Your
Response 5 will reset to record
from the beginning of the tape.
Any existing messages will be
recorded over.
A new outgoing message can be
recorded remotely at any time.
However, as with recording a new
outgoing message locally, any stored
messages will be deleted. Playback any
stored messages before recording a new
outgoing message, as subsequent
retrieval will not be possible.
Additional features
15