BT RESPONSE 115, Руководство пользователя

Страница: 20 / 28

Help
If you have any problems using your Response 115, try the
following solutions
No dialling tone
Is the line cord connected to the socket and
the telephone?
Has the handset been left off by mistake?
You dial and nothing happens
You may be connected to an exchange
which has not been modernised. Call BT on
Free
fone 0800
800 150
for information.
Set the mode switch to
P
(See ‘Setting up’ ,
page 6.)
The phone does not ring
Check that the phone is connected to the line.
Are there too many other phones or fax
machines plugged in which could be
overloading the sockets? (See
‘Ringer
Equivalence Number’ , page 22.)
Have you turned the ringer off? (See page 6.)
The machine doesn’t take messages.
Check that the MC30 cassette cover has been
replaced and clicked shut.
Is the answering machine switched on?
To save messages after the machine has
reset the tape to the beginning
You can still save your old messages as long as
no new messages have been received.
•
Lift the main cover.
•
Press and hold down the
SAVE/STOP
button
until you hear a long beep.
This may take a little while if you have a lot of
messages. The
MESSAGE COUNTER
flashes to
indicate the number of messages saved.
Message Counter flashes 3 times and
pauses repeatedly
Check that the MC30 cassette is seated correctly
and the lid is clicked shut. Then turn the power
off and on. If the
MESSAGE COUNTER
continues
to flash then re-record an
OGM
(see page 9).
Message Counter flashes F and pauses
repeatedly
indicates that your MC30 cassette is full.
F
SAVE
STOP
18