2. Plug the other end into the mains power wall socket.
Connect the telephone line
1. Plug the telephone line cord into the telephone wall socket.
Setting the time
1. Press
. Display shows
WHERE?
. Now press
(located between the
and
memory buttons). The
display briefly shows
SETUP MODE
then
HOLD STORE TO
EXIT
before moving to the first option
RINGER TONE
.
2. Press
repeatedly until the display shows
12:00AM
or
the currently set time.
3. Use the keypad to enter the time, e.g. 0907 =
9:07
.
The clock is 12 hour format.
4. Use the
buttons to select
AM
or
PM
, then press
to save the settings and return to standby.
Getting started
7
BT Relate 3000 ~ Issue 3 ~ Edition 02 ~ 12.08.04 ~ 6346
If you have subscribed to your
network’s Caller Display service, the
time will be set automatically when
you receive your first call.
Holding the
button down will
save any settings changed and exit
the set-up mode.
batteries
UM-30R "AA" SIZE
WARNING
Please disconnect
the telephone line cord
before opening this cover
The voice prompts will not work if
the mains power is not connected
and switched on.
6346 Relate 3000 UG [2] 12/8/04 11:19 am Page 7