manualshive.com logo in svg

BT PaperJet 300, Инструкция по установке и эксплуатации

Поделиться
Скачать
BT PaperJet 300 Скачать руководство пользователя страница 7

6

If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or visit bt.com/producthelp

6

Parent unit

Your BT Digital Baby Monitor 300

Lanyard attach point 

You can loop a lanyard 

(not supplied) through here.

+ Vol.

Increase speaker volume.

Talk

Press to talk to your baby.

- Vol.

Decrease speaker volume. 

Mute is switched on when -Vol 

is pressed to the lowest level.

Microphone

Mute LED

Steady red indicates that Mute 

has been switched on.

Battery LED status indicator 
(top of unit)

Red flashing light indicates the 
batteries are low and need  
re-charging. Solid red indicates 
the Parent unit is charging.

Baby sound level LEDs 

Indicates the level of received 
sound. The LEDs will light up 
progressively as the sound 
increases. See page 13 for  
further information.

Link status indicator

Steady green indicates that 
the Baby and Parent units are 
linked. Flashes green if not 
linked for the first 30 seconds. 
Flashes red if not linked for 
longer than 30 seconds.  
Also flashes green when the 
Talk button is pressed on the 
Parent unit to initiate parental 
talk back.

Power on/off

Press and hold to switch the 
power on or off.

2250 Baby Monitor 300 UG Iss2.[2].indd   6

10/04/2014   11:06

Содержание PaperJet 300


























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды