BT Digital Baby Monitor Plus Скачать руководство пользователя страница 5

Baby Unit

Once your Parent Unit has been fully charged:

1. Plug the mains power 

cable into the socket 
marked 

on the 

side of the Baby Unit. 
Connect the other end 
to the mains power and 
switch on. 

Using batteries

Your Baby Unit also works on battery power, so that you
can use it even when you are not near to a mains power
socket or during a power cut.

1. Using your finger or a coin,

turn the battery lock on the
back of the Baby Unit anti-
clockwise so the groove is
horizontal then lift off the
cover.

2. Insert 4 x AA Alkaline

batteries 

(not supplied)

as shown.

3. Replace the battery cover,

turning the battery lock
into the vertical position
again to lock it.

Check the connection

When both Units are switched on, the green link lights
on both Units will come on.

If the link between the Units is broken at any time, the
link lights will turn red and flash slowly and

Not Linked

will be displayed on both Units. 

At the Parent Unit, you will also hear an alert signal 
(3 beeps) to warn you that there is no communication
between the Units. If this happens, check that the mains
power is plugged in and switched on at the Baby Unit.
Also check that the Units are within range of one another.

5

Setting up

BT Digital Baby Monitor Plus – Edition 4 – 26.02.04 – 5740

WARNING

Use only the mains power adapter
supplied. Using an incorrect
adapter may permanently damage
the Baby Monitor.

!

Please note

The Baby Unit will only work from
the batteries if the mains power is
off or disconnected.

Battery performance

The recommended batteries are 
4 x AA Alkaline (2500mAh).

With new batteries, your Baby Unit
will give up to 24 hours continuous
performance with the night lights
switched off. This will be less if the
lights are switched on.

When the Baby Unit is not being
used and is disconnected from the
mains power, you should ensure 
you remove the batteries. This will
prevent the batteries discharging.

In the event of power failure, when
the power is restored all your
settings will remain unchanged.

Lock

Unlock

All manuals and user guides at all-guides.com

Содержание Digital Baby Monitor Plus

















Отзывы: