BT Converse 425 ~ Issue 3 ~ 2nd Edition ~ 23rd July ’03 ~ 5528
Recall button
The
Recall
button is for use
with switchboard services,
e.g. to transfer calls and some
BT Calling Features.
Five minutes memory
back-up
If you unplug your Converse
425 from the telephone socket
and it has fully charged
batteries, it will keep all the
numbers you have stored in
the memory. However, if you
unplug your Converse 425 and
your batteries are totally
discharged, numbers stored in
the memory will be maintained
for about 5 minutes.
Pre-programmed BT Calling
Features numbers will not be
affected.
Data Port
A socket has been provided on the
telephone stand to allow easy connection
of another product (typically a modem
or Caller Display unit). Plug the other
product into the socket marked DATA
as shown below.
Data port
14
USING
LINE
DATA
To use the MRC function
Your calculator provides a
Memory Recall (
MRC
)
function. This enables you to
put calculations in the
memory while you make other
calculations, and then add
them together or subtract one
from the other.
For example:
Press the
Calculator
button.
The display changes to the
calculator function.
Enter the number you want,
i.e.
50
.
Turn the
Navigator Wheel
to
display the function
M+
.
Press the
✔
button.
Enter the second number,
i.e.
20
.
Navigator Wheel still displays
the function
M+
.
Press the
✔
button.
Turn the
Navigator Wheel
to
MRC
.
Press the
✔
button.
Display shows the total on
memory
70
.
Note
If your Converse 425 is connected to a
switchboard, you must first switch off
the calculator before transferring a call.
