Quick set-up guide
5
If you need some help, call us on
0800 218 2182*
or go to
bt.com/producthelp
Talk/Standby time
Under ideal conditions, the
handset batteries should give
up to 12 hours talk time or
120 hours standby on a single
charge.
Please note that new Ni-MH
rechargeable batteries don’t
reach full capacity until
they’ve been in normal use
for several days.
Battery low warning
The
icon will flash, you’ll
see the message
Battery
Low
in
the display and hear a warning
beep every minute, to indicate
that you need to recharge your
handset before you can use it.
You can remove the display
message by selecting
Hide
. If
the battery charge completely
runs out, the display will show
Batteries
flat.
Please
charge
.
You must recharge the handset
batteries before you can use
the handset. If the charge
completely runs out the
handset will switch off. Place
the handset on the base or
charger to charge.
Quick set-up guide
5
2
Activate the batteries and
follow the Set-up wizard
1. Activate the batteries by pulling
the plastic tab away from the
back of the handset.
2. The handset will check for a
link with the base station.
Once found, the screen will
show,
Please
set
the
time
and
date
. Press the Left option
button
on the handset to
follow the setup wizard. You’ll
need to set the time and date, but you can then
press the Right option button
to skip any
further options until setup is complete (you can
always set these up later).
Remove this tab
and charge batteries
for 24 hours before use.
Rechargeable batteries
already fitted
Please set the
time and date
