BT Baby Monitor 100, Руководство пользователя, Страница: 9 / 24

9
If you experience any problems, please call the Helpline on
0808 100 6554*
WARNING!
Use only the mains power adapter
supplied. Using an incorrect adapter
may permanently damage your BT
Baby Monitor 100.
The Baby unit will only work from the
batteries if the mains power is off or
disconnected.
3. Replace the battery cover, turning the battery lock into the
vertical position again to lock it.
Check the connection
When both Units are switched on, the green link lights on both
Units will come on.
If the link between the Units is broken at any time, the link
lights will turn red and flash slowly.
At the Parent unit, you will also hear an alert signal (3 beeps
every 30 seconds) to warn you that there is no communication
between the Units. If this happens, check that the mains
power is plugged in and switched on at the Baby Unit.
Also check that the units are within range of one another.
During continual use the Baby unit and Parent unit charger
power adapters may become warm to the touch. This is
normal and not something to be concerned about.
In the event of power failure, when the power is restored all
your settings will remain unchanged.
Setting up