BSX BSX579B Скачать руководство пользователя страница 4

4  IMPORTANT INFORMATION 

To ensure a reliable reading follow these recommendations before taking a measurement: 

All physical activity, excitement, stress, eating, drinking, smoking, body posture and many other activities 

or factors (including taking a blood pressure measurement) will influence blood pressure value. Because of 

this, it is mostly unusual to obtain identical multiple blood pressure readings.     

Blood  pressure fluctuates  continually  (day  and  night).  The  highest  value  usually  appears in  the  daytime 
and lowest one usually at midnight. Typically, the value begins to increase at around 3:00AM, and reaches 
to highest level in the daytime while most people are awake and active.   

Considering the above information, it is recommended that you measure your blood pressure ata fixed time 
every day if needed. 

Please always relax a minimum of 2 to 3 minutes between measurements to allow the blood circulation in 

your Arm to recover. It is rare that you obtain identical blood pressure readings each time.     

Please pay attention to the following information before use: 

-  Avoid  the  effect  of  blood  flow  interference  and  resulting  harmful  injury  to  the  PATIENT  caused  by 
continuous the CUFF Pressure Mo due to connection tubing kinking; 

- Too frequent measurements can cause injury to the PATINET due to blood flow interference; 

-Avoid the application of the CUFF over a wound, as this can cause further injury; 

-Avoid  the  application  of  the  CUFF  and  its  pressurization  on  any  limb  where  intravascular  access  or 
therapy, or an arterio-venous (A-V) shunt is present because of temporary interference to blood flow and 
could result in injury to the PATIENT; 

-Avoid the application of the CUFF and its pressurization on the Arm on the side of a mastectomy or lymph 
node clearance; 

-Please  pay  attention  to  the  information  that  pressurization  of  the  CUFF  can  temporarily  cause  loss  of 
function of simultaneously used monitoring ME EQUIPMENT on the same limb; 

-Please pay attention to the necessity of checking (for example, by observation of the limb concerned) that 
operation  of  the  Monitor  does  not  result  in  prolonged  impairment  of  the  circulation  of  the  blood  of  the 
PATIENT. 

-A  minimum  of  2hrs  required  for  the  ME  Equipment  (this  monitor)  to  warm  from  the  minimum  storage 
temperature  (-20°C)  between  uses  until  the  ME  Equipment  (this  monitor)  is  ready  for  its  Intended  Use 
when the ambient temperature is 20 °C. 

-  A  minimum  of  2hrs  required  for  the  ME  EQUIPMENT  to  cool  from  the  maximum  storage  temperature 
(55 °C) between uses (4.2.2) until the ME EQUIPMENT is ready for its INTENDED USE when the ambient 
temperature is 20 °C. 

- This product contains small parts that may cause a hazard if swallowed by infants, toddlers and children. 

- Do not use this monitor on infants, toddlers, children or person who cannot express themselves. 

- In order to keep the monitor clean, hygienic and working normal, do not contact with pets and pests. 

The Monitor has different features to meet different 

user’s need. 

Please kindly read the Instruction for Use with the relevant Model Number you purchased and notice the 
difference between them. 

Please read the Instruction for Use thoroughly before using this Monitor and please consult your physician 
for the specific information about your blood pressure. 

Instruction for Use printed in English.

 

Содержание BSX579B


























Отзывы: