EN - 32
Problem
Problem
Problem
Problem
Possible cause
Possible cause
Possible cause
Possible cause
Repair measures
Repair measures
Repair measures
Repair measures
The brakes do not work
correctly.
The rim, brake discs, shoes or
pads are dirty or greasy.
Clean the rims and other parts of the
brake system.
The brake is incorrectly adjusted
(the arms are too far apart).
Perform adjustment using the brake
regulating elements.
The brake cable does not move
correctly.
Check attachment of the cable and the
condition of the Bowdens, or replace
damaged cables or Bowdens.
The brake shoes or pads are
worn.
Replace the brake shoes or pads, only
use a type correspond to the used
brakes.
The brakes make a
noise.
The brake shoes are incorrectly
adjusted.
Check adjustment of the brake shoes.
The brake securing element is
loose.
Tighten the screws and adjust the
brakes.
The brake shoes or pads are
worn.
Replace the brake shoes or pads, only
use the correct type.
The rim, brake discs, shoes or
pads are dirty or greasy.
Clean the rims and other parts of the
brake system.
There is no charge in
the battery.
The battery is not switched on.
Switch the battery on.
The battery is discharged.
Charge the battery.
The output cable is not connected
to the battery.
Connect the cable from the battery
according to the instructions.
The charger LED
indicator does not come
on.
Incorrectly connected to the
mains.
Check the socket and proper
connection of the power supply cable
to the charger and to the mains socket.
Defective charger.
Replace the charger.
Battery not charging.
Bad contact between the charger
output connecter and the battery.
Check the output connector from the
charger to make sure it is correctly
connected to the battery.
Battery overcharge mechanism
active.
The battery can be used as normal.
Charger is damaged.
Replace the charger.
Battery elements are defective.
Replace the battery.
The LED indicator
remains red even after
long periods of
charging.
Defective battery.
Have the battery tested.