BSVILLAGE AQUAJACK 301, Руководство оператора

Страница: 30 / 60

30
GETTING STARTED
1. Charger set up
(1)Plug one end of the charger into the
socket, and the charger is green
.
(2)
Then, plug one end of charger to
P1116, the charger is red, the charger is
working now.
(3)After charging 5-6 hours, the charger
becomes green, and P1116 is fully
charged.
(4)Now, it is time to work.
NOTE: The Vacuum head can be lock and unlock, When the
vacuum head is not locked, it can be rotated in 360 degrees
and make the cleaning work more conveniently.Fig[a1][a2]
NOTE:
Charge the cleaner 5-6 hours prior to the first use.
Normally cleaner can be operated 90 minutes after fully charged.
2. Handle assembly
By arrow direction to assemble the body parts, and attention the SIGN from Open to Close.
(1). Portable handle
Connection into the product
itself. The portable handle is
used to pick up P1116 and
clean the wall, step, seat,
cornor.Fig[A]
3. Suction head assembly
Insert the Suction Head directly to the suction hole of the cleaner tightly by hand.
In order to have the better suction effect, please operate the
electric cleaner as the following instructions:
(2)No need to insert the suction head onto the electric cleaner
when suction the stones and other large garbage and so on, as
the picture “B” shows.
(1)Insert the suction head when suction the small pebbles and
leaves, as the picture “A” shows.
P1116 can also connect
to standard telescopic
poles by pictures.Fig[B]
A B
(3). If needed, the pole can be
installed in the direction as the
picture “C” and “D”.
B
A
360°
a1
a2
lock
unlock
C D
(2). Telescopic pole
（
not
included
）
assembly
Brushes on the suction head can be removed by pulling out directly from the head.
For Vinyl, liner and fibreglass pools, it is recommended to keep the brushes on the suction head to
prevent damage to your pool.
Note: This product can work only under water, if
out of water, it will stop working.