5
3. EXTERNAL SPEAKER OUTPUT
This two RCA sockets can be used to connect one or two external speakers.
-
When you plug your cable on the withe RCA socket, you switch the internal HP off and all the sound is on the external speaker.
-
When you plug your cablle on the red RCA socket, the internal HP and the external speaker are available.
4. EXTERNAL POWER SUPPLY SOCKET
This socket is used to plug an external power supply ( 18V DC ( not provided in the package ).
5. AC FUSE
Plug the AC power cord into any standard AC outlet. Before plugging this cord in, be sure the voltage of AC outlet is correct.
The fuse protects your speaker from different kinds of ac problems. If the power amplifier is “on” and nothing lights, please verify fuse
compartment. If fuse is broken, please read it and change with a new one of same size and value.
6. POWER
SWITCH
Select the “On” position to switch the speaker on. Select the “Off” position to switch the speaker off. Select the “Charge“ position to recharge the
internal batteries.
Note : When operating this switch, make sure that all controls are set at minimum position.
7. TONE
CONTROL
This rotary potentiometer is used to adjust the tonality of the music ( in the left position = treble, in the right position = low ).
8. TAPE
LEVEL
CONTROL
The tape level adjustment can be used to adjust level of the tape signal to obtain the desired volume.
9. ECHO
CONTROL
Use this rotary control to add echo effect on all the micro channels ( VHF or wired microphone ).
10. EXTERNAL SOURCE VOLUME CONTROL
The external source leveladjustment can be used to adjust level signal to obtain the desired volume.
11. CD REC OUTPUT
You connect a minidisc or a tape recorder to record your mix or your meeting.
12. LINE OUT OUTPUT
The level of this output is controlled by the rotary potentiometers of each peripherical ( VHF receivers, CD player, tape player, wired microphones ).
Connect this output to an additional power amplififer.
13. MIC 3 LEVEL CONTROL
Use this control to adjust the level of the microphone plug in the MIC 3 input to obtain the desired volume.
14. EXTERNAL SOURCE INPUT
This socket is an input. You can adjust the level of this input in using the potentiometer ( 10 )
15. MIC 3 INPUT
Can be used to connect a microphone. Adjust the level by using the potentiometer (13).
16. MIC 2 LEVEL CONTROL
Use this control to adjust the level of the microphone plug in the MIC 2 input to obtain the desired volume.
17. MIC 2 INPUT
Can be used to connect a microphone. Adjust the level by using the potentiometer (16).
18. MIC 1 INPUT
Can be used to connect a microphone. Adjust the level by using the potentiometer (2).
CD player :
19. CD DECK
Insert the CD in this part
20. DISPLAY
21. PLAY/PAUSE BUTTON
Push this button to start the playback or to enter in the pause mode.
