Overview of UV flame detectors and ancillary
Article
Flame detector KLC 10/230
Flame detector KLC 10/230,
with high sensitivity
Flame detector KLC 10/230
Flame detector KLC 10/230,
with high sensitivity
Mounting flange KLC
Mounting flange KLC
ADP 11 – UV*
ADP 21 – UV*
Connecting cable KLC
Connecting cable KLC
Connecting cable KLC
Connecting cable KLC
Connecting cable KLC
Connecting cable KLC
* only for flame detector with an axial orientation
**(reduced sensitivity at approx. 40%)
IMPORTANT:
For safety reasons and within the technical regulations, a controlled burner shut
the burner must occur and be guaranteed to happen at least once in every 24 hours of operation. With
the model KLC 10 it is mandatory that the Control Bo
type which performs a flame check for ‘no flame presence’ on burner shut down. Such that both the
burner is checked for possible ‘after burn’ and that the UV tube itself is checked for soundness in
accordance with the European Standard EN298. The
Control Units which perform this flame check on shut
If you are unsure about any application using this flame detector, please
or the authorised distributor.
Disposal information
The flame detector is equipped with electrical and electronic components and
must be disposed separately from household waste
authority regulations for electrical component
BST Solutions GmbH
Eggerscheidter Straße 57
D - 40883 Ratingen
Telefon: +49 (02102) 1005959
Telefax: +49 (02102) 1005979
Email:
http://
www.bst-solutions.de
©BST Solutions 2015
DIN EN ISO 9001:2000
Zertifikat: 09 100 5438
- 6 -
UV flame detectors and ancillary components available:
Version
optical direction radial
optical direction radial
optical direction radial and axial**
optical direction radial and axial**
overall height 7 mm
overall height 13 mm
Aluminum, R ½“, quartz glass
heat-insulated up to 180°C,
R ½“, quartz glass
length of 300mm
length of 350mm
length of 600mm
length of 1000mm
length of 2000mm
special lengths on request
* only for flame detector with an axial orientation
For safety reasons and within the technical regulations, a controlled burner shut
the burner must occur and be guaranteed to happen at least once in every 24 hours of operation. With
it is mandatory that the Control Box Unit or Burner Management System is of the
type which performs a flame check for ‘no flame presence’ on burner shut down. Such that both the
burner is checked for possible ‘after burn’ and that the UV tube itself is checked for soundness in
th the European Standard EN298. The model KLC 10 can only be used with intermittent
Control Units which perform this flame check on shut-down. Otherwise use the
If you are unsure about any application using this flame detector, please email, or fax the manufacturers
The flame detector is equipped with electrical and electronic components and
from household waste. Please follow your local
electrical component waste disposal.
BST Solutions 2015 technical modifications reserved
TB_KLC10_EN_REV0.DOCX
components available:
Part-No.
611145021000
611145021160
611145061000
611145061160
665001010000
665002010000
575010512210
575010512230
661030040100
661035040100
661060040100
661100040100
661200040100
For safety reasons and within the technical regulations, a controlled burner shut-down of
the burner must occur and be guaranteed to happen at least once in every 24 hours of operation. With
x Unit or Burner Management System is of the
type which performs a flame check for ‘no flame presence’ on burner shut down. Such that both the
burner is checked for possible ‘after burn’ and that the UV tube itself is checked for soundness in
can only be used with intermittent
model KLC 11.
email, or fax the manufacturers
Revision 0