5
7. SELECTOR TALKOVER
This switch have three positions
In the OFF position, Le DJ microphone is disable .
In the ON position the DJ micro is available and the operating is normal ( the level of the channels stay unchange ).
In the TALKOVER position , the DJ micro is available and the level of all the channels is decrease of 14dB ( except the DJ micrpjone
channel ).
The level will return to the normal value when the selector will be set in position ON or OFF.
8. LOW TONE ADJUSTMENTS
This potentiometer is used to adjust the LOW frequency response. They correct the signal in a –40dB/+10dB range.
Note : Too much adjustments can distort the sound.
9. FX SELECTOR
Use this button to select the channel ( 1, 2 , micro DJ or master) you want to send to the digital effect.
10. BPM DISPLAY
This two displays show you the BPM value of each channel. This BPM counter is an automatic BPM counter
11. INPUT SELECTOR
This selector is used to choose the input signal between PHONO/AUX or LINE
12. PARAMETER DISPLAY
A)
This display can show severals indications: either it show you the value of the parameter of the selected effect, either it show you the
BPM value of the selected source ( in using the Fx buttons ).
-
If you select the DELAY or ECHO effect, the displayed value is the duration of the echo or of the delay (range of adjustment 2 to
2000ms)
-
If you select the PAN or TRANS effect, the displayed value is the duration of the effect ( range of adjustment 30 to 9990 for PAN,
range of adjustment 25 to 9990 for TRANS )
-
If you select FILTER, FLANGER or PHASE, you can adjust the value from 100 to 9900
-
If you select PITCH SHIFTER, the value of the parameter i the % of modification of the speed ( range of adjustment –100 to +100 )
B)
This set of led show you this range of value of the effect parameter.
13. INPUT LEVEL CONTROL
The channel level slide control can be used to adjust the individual input to obtain the desired volume. The curves of the channels 1 & 3
can be adjusted ( in using the fader curve controls (30)). You can reverse the curve of the channels 1 & 3 in using the reverse switch
(29)).
14. KILLER SWITCH ( FADER 1 & FADER 2 )
These commutators enable you to eliminate the high frequencies of the channel, the mid ones or the low ones.
You have 2 choices :
-
Either you put the commutator on the down position. In this case, the frequencies corresponding to the commutator will be
stopped ( to come back to the original functionning, put the commutator back on “off” position).
-
If you want tot eliminate one ( or several ) group of frequencies temporarily ( for short periods of time ).
To do that, press the commutator ( corresponding the the group of frequencies you want to eliminate
to the top position. The frequencies will be eliminated as long as you will maintain tue button pushed. Release button to stop
this function.
15. CROSSFADER
This horizontal slider provides clean seagues between the channel 1 & the channel 3. The curve of the crossfader can be adjusted in
using the crossfader curve control (32)) and you can reverse the direction of the crossfader when you push the crossfader reverse switch
(31)
16. CUE SWITCH
Used to choose the channel you want to send to the headphone. When the channel is selected, The corresponding button lights on.
17. SPLIT CUE BUTTON
This button will activate the split cue function. When used with a set of stereo headphone, the split cue function assign the cue signal to
the left channel of the headphone and assign the program ( master ) signal to the right set of the headphone. Essentially splittnig the cue
signal in half. Please note that this function will only work with a set of stereo headphone
18. BEAT SELECTOR BUTTON
This button is used to modify the value of the effect parameter more faster than using the parameter button (20). 5 ranges of value are
available for each effect ( corresponding to 5 following leds ( 1/2, 3/4, 1/1, 2/1 et 4/1 )). Each press on this button change the range of
value.
Example : if you select PITCH SHIFTER and if the value of the parameter is –100, one press on this button you will make pass to –50 ( led
3/4 ). Another press on this button you will make pass to 0 ( led 1/1 ).
19. HEADPHONE LEVEL CONTROL
Use to adjusting the level of the stereo headphone.
20. DEPTH BUTTON
This control is used to adjust the level of the effect. From Min., the effect is dissable. From Max., the effect will be to the maximum of its
amplitude
21. CUE MIX
This potentiometer allows to make a mix in the headphone, from the selected CUE channel and the master output (PGM).
22. PARAMETER CONTROL
This adjustment allows you to increase or to decrease the value of the parameter of the selected effect
23. FX ON/OFF SELECTOR
This button is used to set the digital effect output ON or OFF.