BP-7 WWW.BSTDJ.COM
© Copyright LOTRONIC 2012
Page 4
ENGLISH
Thank you for having chosen our UHF belt transmitter. For your own safety, please read this user manual carefully before installing the device.
SAFETY INTRODUCTION
•
If the device has been exposed to temperature changes due to environmental changes, do not switch it on immediately. The arising
condensation could damage the device. Leave the device switched off until it has reached room temperature.
CAUTION:
1. Please be aware that damages caused by manual modifications to the device are not subject to warranty. Keep away from children and non-
professionals.
2. The belt transmitter doesn’t include any spare parts for repair, please check if all the parts are well installed and screws are fitted tightly
before operating.
GENERAL GUIDELINES
•
Operate the device only after having familiarized yourself with its functions. Do not permit operation by person not qualified for operating the
device. Most damages are the result of unprofessional operation.
•
Please use the original packaging if the device is to be transported.
•
For safety reasons, please be aware that all modifications on the device are forbidden. Furthermore, any other operation may lead to short-
circuit, burns, electric shock, crash, etc. If this device will be operated in any way different to the one described in this manual, the product
may suffer damages and the guarantee becomes void.
DESCRIPTION
MAIN DESCRIPTION
1) Antenna
2) Mic
input
Connect on this socket either tie mic, either headset mic
3) LCD
display
4) Batteries
cover
5) Tie
clip
6) Cartridge
INSIDE DESCRIPTION
1) Power
switch
Use to switch the belt transmitter on or off
2)
Up / Down buttons
Use to select frequency, kind of display or enable lock function
3) SET
button
Use to validate your setups ( frequency, display or lock function )
4) Batteries
place
Place for 2 batteries AA 1.5V
5) Level
control
Use to adjust sound level
6) Sensitivity
control
This selector is used to ajust sensitvity of the cartridge. In HIGH position, the
cartridge is in high sensitivity, you can talk far from the cartridge ( but cartridge will
be sensible with the surrounding noises ). In LOW position, you must to talk near
from the cartridge.
7) Infrared
sensor
Use this sensor to adjust ACT function. ACT function automaticaly sets the
frequency between receiver and transmitter.
