BST 15-2844, Инструкция по эксплуатации, Страница: 4 / 10

© Copyright LOTRONIC 2014 X12A-X15A Page 4
11. COOLING VENTS
These holes are using to refresh the built-in power amplifier. don't obstruct this part
12. AC SOCKET
Before to connect the ac cord on this socket, make sure that the available voltage is not higher than stated at the end of this
manual
13. COOLING FAN
This fan is used used to refresh power amplifier. don't obstruct these parts
14. POWER SWITCH
This switch is used to to switch the subwoofer built-in power amplifier on or off.
15. POWER SUPPLY SELEC
The main power supply is different between country ( in france :220V ). Select the good value with the switch ( 110V or 220V )
TECHNICAL SPECIFICATIONS
X12A :
Ways: 2
Woofer : 12'' ( 31cm )
Tweeter : 1,34''
Frequency Range (-10 dB) : 55 Hz - 20KHz
RMS Power Rating : 350 W
Impedance : 8 ohms
Max SPL : 120 dB SPL peak
System Sensitivity (1w/1m) : 96 dB SPL
Input sensitivity : 1.2V
Distortion : <0,5%
Damping factor : >200
Protection : Soft start, short circuit, overheating
Power supply : AC110-120V / 220-230V / 50-60Hz
Enclosure : ABS
Dimensions (D x W x H) : 378 mm x 358 mm x 580 mm
Net Weight : 18,65 kg