MT12A-DIGIT / M15A-DIGIT WWW.BSTDJ.COM
© Copyright LOTRONIC 2013 www.lotronic.com
Page 6
12. AC FUSE
Before to connect the ac cord on this socket, make sure that the available voltage is not higher than stated at the end of this manual
The ac fuse is integrated on the power connector. It’s used to avoid power supply default on speaker. if the ac cord is connected and
power switch push on the position on but speaker doesn’t work, please check the fuse. if the fuse is out of order, replace it by fuse with
same size and same value.
13. POWER SWITCH
Select the “On” position to switch the speaker on
CONNECTIONS
-
Use XLR-XLR or Jack-Jack cables to connect mic level devices ( microphone or wireless set ) to the mic input of the MTA-DIGIT speaker .
-
Use XLR-XLR or Jack-Jack cables to connect line level devices ( CD player, DVD player or mixer ) to the line input of the MTA-DIGIT
speaker.
-
Use XLR-XLR or Jack-Jack cables to connect link inputs to mic or line inputs or other active speakers or power amplifiers
SPECIFICATIONS
MT12A-DIGIT :
Woofer :
12’’ ( 31cm )
Driver :
1.75’’
Frequency response :
48Hz – 20KHz
Sensitivity :
102dB
RMS power :
420W
Max power :
800W
Amplifier module :
Digital bi amp 340W + 75W
Line input :
Combo XLR/Jack
Mic input :
Combo XLR/Jack
Mic link output :
XLR male
Line link output:
XLR male
Power supply :
110V or 220-240VAC, 50/60Hz
Consumption :
500W
MT15A-DIGIT :
Woofer :
15’’ ( 38cm )
Driver :
1.75’’
Frequency response :
42Hz – 20KHz
Sensitivity :
109dB
RMS power :
420W
Max power :
800W
Amplifier module :
Digital bi amp 340W + 75W
Line input :
Combo XLR/Jack
Mic input :
Combo XLR/Jack
Mic link output :
XLR male
Line link output:
XLR male
Power supply :
110V or 220-240VAC, 50/60Hz
Consumption :
500W
WARRANTY CONDITIONS
BST equipment is covered by a 2-year warranty on parts and labour.
The following rules apply from the day the equipment leaves the factory:
The date on the invoice is considered to be the date the warranty begins.
Only companies approved by BST are allowed to work on the equipment. Warranty becomes void when other service technicians open the
equipment.
During warranty period, defective equipment must be sent by pre-paid mail in the original box.
BST will return the goods by pre-paid mail during the first year of warranty; thereafter the mailing cost is to be paid by the recipient
Potentiometers have a limited lifetime and are not covered by the manufacturer for more than normal use.
For all service enquiries, refer to your local distributor, as he is best able to help you.
