T-6222 S
© Copyright LOTRONIC 2012
Page 7
OPERATING
DISPLAY DESCRIPTION
-
Open power supply switch on, display show last time close employment state.
-
After, select band frequency in pushing the band button ( either AM, either FM ). As if show an't want to wave band, invite press Wave
band key stoke accept of wave band, per Press once, give switch fm/am
-
Select the search mode : either auto mode, either manual mode
-
Press key up direction high end frequency search, press key down direction low end frequency search. Auto tune occasionally: Auto
take over one broadcasting station manual tune occasionally: Repeat press (or persist press) up to select broadcasting station
-
The tuner is provided with remote control
-
You can memory up to 100 radio station
TECHNICAL SPECFICATIONS
FM band
Frequency response :
87-108MHz
Sensitivity :
20uV
Signal / noise ratio :
40dB
AM band
Frequency response :
522-1611KHz
Sensitivity :
6mV
Signal / noise ratio : 36dB
Memories :
100
Power supply :
220V / 50Hz
Consumption :
8W
Dimensions :
484 x 209 x 44mm ( 19’’ / 1U )
Weight :
3.8Kg
CE, ROHS norms
WARRANTY CONDITIONS
BST PRO equipment is covered by a 2 years warranty on parts and labour
The following rules apply from the day the equipment leaves the factory:
The date on the invoice is considered to be the date the warranty begins.
Only companies approved by BST PRO are allowed to work on the equipment. Warranty becomes void when other service technicians open the
equipment.
During warranty period, defective equipment must be sent by pre-paid mail in the original box.
BST PRO will return the goods by pre-paid mail during the first year of warranty; thereafter the mailing cost is to be paid by the recipient
Potentiometers have a limited lifetime and are not covered by the manufacturer for more than normal use.
For all service enquiries, refer to your local distributor, as he is best able to help you.
1. STEREO
INDICATOR
Radio stations can be diffused in stereo or mono modes. If this indicator is
light, that means the radio station is diffused in stereo mode.
2. AUTO
INDICATOR
This indicator shows yoy the searching mode : Auto or manual mode
3. FREQUENCY BAND INDICATOR
This indicator shows you the band frequency : AM or FM
4. FREQUENCY
5. FEQUENCY UNIT INDICATOR
This indicator shows you the frequency unit : MHz for FM band, KHz for AM
band
