BSS Audio MSR-600 II Series, Руководство пользователя

Страница: 3 / 38

U.K. MAINS PLUG WARNING
A molded mains plug that has been cut off from the cord is
unsafe. Discard the mains plug at a suitable disposal facili-
ty. NEVER UNDER ANY CIRCUMSTANCES SHOULD YOU INSERT A
DAMAGED OR CUT MAINS PLUG INTO A 13 AMP POWER SOCKET.
Do not use the mains plug without the fuse cover in place.
Replacement fuse covers can be obtained from your local
retailer. Replacement fuses are 13 amps and MUST be ASTA
approved to BS1362.
IMPORTANT SAFETY INSTRUCTIONS
ELECTROMAGNETIC
COMPATIBILITY
This unit conforms to the Product
Specifications noted on the Declaration
of Conformity. Operation is subject to
the following two conditions:
• this device may not cause harmful
interference, and
• this device must accept any interfer-
ence received, including interference
that may cause undesired operation.
Operation of this unit within significant
electromagnetic fields should be avoided.
• use only shielded interconnecting
cables.
Manufacturer's Name: BSS Audio
Manufacturer's Address: 8760 S. Sandy Parkway
Sandy, Utah 84070, USA
declares that the product:
Product name: MSR602II and 604II
Note: Product name may be suffixed by
the letters-EU.
Product option: None
conforms to the following Product Specifications:
Safety: IEC 60065 (2001)
EMC: EN 61000-3-2:1995
EN 55013:1990
EN 50082-1:1992
Supplementary Information:
The product herewith complies with the
requirements of the Low Voltage Directive
73/23/EEC and the EMC Directive 89/336/EEC
as amended by Directive 93/68/EEC.
Director of Engineering, BSS Audio
8760 S. Sandy Parkway
Sandy, Utah 84070, USA
Date: May 22, 2006
Revised: October 27, 2006
European Contact:
Your local BSS Audio Sales and Service Office or
Harman Music Group
8760 South Sandy Parkway
Sandy, Utah 84070, USA
Ph: (801) 566-8800
Fax: (801) 566-7005
BSS MSR 602II and 604II
The BSS MSR602 requires a standard 19
inch rack width and single rack-space for
mounting.
In order to ensure proper ventilation and
cooling it is to be mounted with one
empty rack-space above and one empty
rack-space below the unit.