manualshive.com logo in svg

BSM Home 4+, Руководство по установке, Страница: 11 / 17

Поделиться
Скачать
BSM Home 4+ Скачать руководство пользователя страница 11

11

mentary status/alternative key-switching

“8” dark/flashing (bit “Zone8T” = 0/1) – zone

8 as trouble/tamper

5.1.5. If button “5” is pressed, record of zones

for the first user area is available:

Alternative, pressing of button from “1” to “8”

follows by flashing of LED between 1 and 8

(corresponding to zones between 1 and 8).

When corresponding LED flashes, the zone is

connected to first user area, but dark LEDs cor-

responding zones are connected to second

user area. Connection of all zones to the area

of the second user is incorrect and forbidden.

Two users can be connected to the system.

Every user has 8 access codes and only one

Master code. If only the zone 8 (keyboard

tamper) is used by the second user, the sys-

tem can be armed and disarmed by all 16 ac-

cess codes. The green LED Mode flashes, but

not permanently if the system is in armed

mode. To quit this mode press, once more but-

ton PRG or other functional button.

5.1.6. If  button “6” is pressed zones test

Содержание Home 4+


















Отзывы:

Нет отзывов