200.0V and 600V and then. The AC voltage ranges are
2.000V, 20.00V, 200.0V and 600V.
To measure DC or AC voltage:
④ Insert the red test lead into the ‡ VΩ· input terminal
and the black test lead into the COM terminal.
⑤ Set the rotary switch to DC or AC range.
⑥ Connect the test lead across with the object under
testing.
The measured value will be show on the LCD
display.
Note:
When DC or AC voltage measurement has been completed,
disconnect the connection between the testing lead and the
circuit under testing.
5-2. Resistance measurement
The resistance range are: 200.0έ , 2.000Kέ ,20.00Kέ ,
200.0Kέ , 2.000Mέ .20.00Mέ .
To measure resistance, connect the meter as follows:
④ Insert the red test lead into the · VΩ· terminal and
the black test lead into the COM terminal.
⑤ Set the rotary switch to proper resistance range..
⑥ Connect the test lead across with the object under
testing.
The measured value will be show on the LCD display.
Note:
◤ The test lead can add 0.1 έ to 0.2 έ of error to
resistance measurement. To obtain precision reading
in low-resistance measurement, that is the range of
200.0έ , short the input terminal before measuring.
In this time, the contact resistance displayed on the
LCD. You can subtract the contact resistance value
from the measured value.
