Additional Installation Instructions
Preparation
Caution:
Before installing, turn power OFF at the service panel. Lock service panel to prevent power from being turned
ON accidentally.
Removing Packaging
•
Cut foil wrap in the area of corner posts.
•
Remove foil completely.
•
Remove top cardboard.
•
Remove all top and side cardboard and Styrofoam braces.
•
Place oven in front of cabinets where it is to be installed.
•
Unscrew unit from Left and Right Brackets as show in Figure 1: Left and
Right Packaging Bracket Removal.
Figure 1: Left and Right Packaging Bracket Removal
Note:
Bracket remains in packaging base. Unit should stay in packaging base plate
until ready to be lifted into cabinet cutout.
For Convection Microwave
Combination Units
Remove 2 rear support Convection Microwave Shipping Brackets prior to
installation as shown in Figure 2: Convection Microwave Shipping Bracket
Removal.
Figure 2: Convection Microwave Shipping Bracket Removal
(for Convection Microwave Combination Units Only)
Preparing Oven
Place oven in front of cabinets where it is to be installed. Rest it on a jack or
other sturdy support so that it is in line with the cabinet cutout.
